Remove rod & handle casting from workhead. Remove old cams & springs.
Compress new springs on each side with pliers and wrap with 10 turns of scotch tape to securely hold in the compressed position.
Place new cams and springs in the cavity as illustrated to the right. Break scotch tape with a screwdriver pushed through the rod hole. Make certain that springs are seated properly and centered in recess.
Insert PULJAK rod from each end to test for alignment of all internal parts. Both cams should move smoothly against spring.
Reassemble handle casting with a notch over the ear of a small cam.
File off heavy ridges on the rod and replace in PULJAK
STRETCHING, PULLING & ALIGNING USING A PULJAK
With a tension bar in the fence, (using ‘Type A’ PULJAK) hook the puller to your tension bar.
Place workhead around the fence post.
Pump handle, drawing fence into desired clamping position.
When using ‘Type B’ PULJAK, hook stretcher studs into fence fabric and proceed as above.
NOTE: To release tension….depress the trigger cam.
C-S PULJAK
A4 PULJAK
Spring Compressor Pliers:
$60.00
Trigger Cam Spring Compressor: $84.00
Small Cam Spring Compressor:
$82.00
LIFTING & PUSHING WITH A PULJAK
Depress the trigger cam and slide worked off the rod.
Reverse workhead so “post notch” faces away from the puller
Reassemble to rod
DO NOT move the handle while the rod is removed!
DO YOU OFFER DELIVERY SERVICES?
Yes, we offer delivery services to customers within a specified distance from our store location. To determine if delivery is available in your area, simply enter your address on our website during the ordering process. The website will provide you with the available delivery options based on your address, ensuring a seamless and convenient experience.
WHAT ARE YOUR DELIVERY CHARGES?
Please note that delivery charges apply based on the order value. Freight charges are as follows:
Freight is $149.99 for orders under $1,000.
Freight is $99.99 for orders between $1,001 and $4,000.
